Spoilers are something that every person wants on his car because of the trendy look that it gives to a car. Spoilers of your own choice can be bought and them be placed on the car by yourself as well. It is not very easy to do so but if you follow the below given instructions properly then it can be done with quite an ease.
• Open and inspect thoroughly your rear spoiler and then begin the installation.
• Open your decklid and cover the carpet area with some other cloth so that the hot metal shaving won’t burn right through the carpet. Plus, also remove the trim panels with a screw driver or better, a panel puller.
• Turn over the spoiler and place it on some soft material so there are no scratches. Place the plastic locator T-strips on to the mounting holes. You can use a masking tape to hold the T-strips in place.
• Close the decklid and place the spoiler on it in its proper desired position.
• Use a tape to attach the T-strips to the decklid of your car. Remove the spoiler now by carefully lifting it straight up and the T-strips should remain attached to the decklid.
• Drill through the strip holes carefully into the decklid.
• Remove the T-strips now and drill more properly as now there will be pointers.
• Remove the metal from the holes are apply some primer to the holes so they won’t rust.
• Now insert a screwdriver through the top mounting holes and give it a push so that there are markers on the inside for you to drill at.
• Now you have to pull pedal gaskets in the back side to see the mounting tape.
Now put the spoiler on the right place and secure it with screws.
• You can also put some silicone based caulk so to prevent the leaking or loosening of the screws.
• Now to install the LED brake light. It is said that you have to splice into the third brake light of the vehicle so to attach the spoiler wires with the help of an electrical tape.
• Check the brake to see if the light is wired properly.
• Last but not the least, get a vacuum cleaner and clean all the debris out.
• Reinstall all the panels, mats and other things which were removed in the start.
• At the end, take some good car polish and clean your spoiler with that so it has a gleam about it.
And the entire process of Car Spoiler Installation has been done. Your car now has a beautiful spoiler at the rear end and from now on when you go out on the roads; your car will look different and will definitely also feel different. Also, the best thing is that now you are aware of this process, you can change your spoiler as well by working it out through these given instructions. No need to go to some mechanic for that at least.
To learn more, please visit the following website: www.spoilerworks.com/product-information.asp#install”>Car Spoiler Installation.
No comments:
Post a Comment